Setup​
  • Rooms and areas to be painted are scheduled with the customer.
  • Switch plates and outlet covers are removed.
  • Furniture is covered with plastic.
  • Floors are covered with drop cloths.
  • Walls are scuff-sanded.
  • Holes and cracks in walls are filled.
  • Gaps in trim are caulked.
  • Stains, such as water marks, are sealed.
  • Washing is done where required.

 Painting
  • Repaired areas are primed.
  • Paint is applied with a brush, roller or sprayer depending on the surface.
  • Ceiling and walls are painted to proper coverage and finish color.
  • Clean cut lines between trim & walls.
  • Only premium quality paints are used.

 Clean Up 
  • Switch plates and outlet covers are replaced.
  • All garbage is removed.
  • ​Touch-up paint is labeled and left with the customer.

Inspection
  • Before the crew packs up their equipment, a walk through is done to ensure all contracted areas are painted properly.
  • Final touch-ups are noted on a punch list & are completed before the crew leaves.

Cleaning
  • Environmentally-friendly detergent or bleach is used to remove dirt and mildew as required.
  • Delicate areas are hand-washed.
  • Loose paint chips are cleaned up.
  • House is given time to dry.

Minor Maintenance 
  • All bare areas are primed.
  • Glossy areas are scuff-sanded.
  • Areas around doors and windows are caulked, window panes receive new putty  where necessary.
  • Wood, masonry and stucco repairs available upon request or when specified on  the contract.

Painting ​
  • All non-painted surfaces are covered to protect against splatter and drips.
  • Paint is applied with a brush, roller, or sprayer depending on the surface.
  • Second coat is available upon request or when specified on the contract.
  • Only premium quality paints are used.

Clean Up 
  • Performed daily and upon completion of the job.
  • All debris is removed.
  • Landscaped areas are cleaned and paint chips removed.
  • Touch-up paint is labeled and left with the customer.
  • Outdoor fixtures & furniture replaced.

Inspection 
  • Before the crew packs up their equipment, a walk-through is done to ensure all contracted areas are painted properly.
  • Final touch-ups are noted on a check list and are completed before the crew leaves.